TKO Clay 02/Bentonite (6:1) Pressed Brick

Material categories:

Soil / Soil based (organic/mineral)

Mineral / Mineral based

Identification number:


Sample produced by:


Sample date:

24 Aug 2023 (Produced)

Sample condition:


Site-driven material

This set of bricks were part of an experiment to determine the amount of bentonite (23-1000-349-e) to add to a clay-y soil (23-1000-349-d). This soil mixture was then evaluated on how it performed when compressed within the brick press. Water was added to the point that the soil mixtures were between the 'plastic' and 'humid' range.

Notes: The bentonite sample was crushed more finely by hand, as well as with a wooden mallet and added to the roughly sieved clay, this was then mixed by hand in a bucket and then further mixed on the tarp. Have noticed that there are inconsistencies in the heights of the bricks, believe this is due to the initial pore space of the soil within the brick press, this could vary the actual volume of soil that is being pressed resulting in varied heights.

Soil Additives: Tseung Kwan O Area 137 Fill Bank Clay 02 (23-1000-349-d) and Tseung Kwan O Area 137 Fill Bank Bentonite Clay (23-1000-349-e)

Ratio of Soil Additives: Clay : Bentonite 6:1

Water Content: Humid/Plastic

Process/Formwork: BRICK PRESS

Surface Condition:


Depth of sample extraction:

> 100 cm

Slope at extraction point:

35° - 45°

Land Use:

Vacant land/construction in progress

Fabrication Process

Forming (including compacting/compressing)